Skip to content
Your Headquarters For Harley Davidson After-market Parts
Your Headquarters For Harley Davidson After-market Parts

classic Engine

Filters

  • $6,249.58 - $6,249.58
    $6,249.58
    $6,249.58 - $6,249.58
    $6,249.58

    1936 Replica Short Block Assembly

    V-TWIN MANUFACTURING
    Low stock

    Replica Knucklehead 61 inch short block is assembled with replica components specific to the 1936 Knucklehead 61 inch factory engine. Full assembly...

    View full details
    $6,249.58 - $6,249.58
    $6,249.58
    $6,249.58 - $6,249.58
    $6,249.58
  • $6,052.37 - $6,052.37
    $6,052.37
    $6,052.37 - $6,052.37
    $6,052.37

    Replica Knucklehead Short Block 74 inch Natural

    V-TWIN MANUFACTURING
    Low stock

    Fully assembled and tested for oil pressure. Short block features a natural finish and includes an 8 finned cover. Replica 74 inch Knucklehead long...

    View full details
    $6,052.37 - $6,052.37
    $6,052.37
    $6,052.37 - $6,052.37
    $6,052.37
  • $3,806.87 - $3,806.87
    $3,806.87
    $3,806.87 - $3,806.87
    $3,806.87

    1936 61 inch Knucklehead Engine Case Set

    V-TWIN MANUFACTURING
    Low stock

    For 61 inch Knucklehead motors accurately cast and machined by Motortechnic in Germany. Features a natural cast finish and a blank number boss. Man...

    View full details
    $3,806.87 - $3,806.87
    $3,806.87
    $3,806.87 - $3,806.87
    $3,806.87
  • $620.53 - $620.53
    $620.53
    $725.75
    $725.75 - $725.75
    $725.75

    Lightning Cam Chest Kit

    V-TWIN MANUFACTURING
    In stock

    Lightning cam chest kit is a 3 piece set with 3 gaskets. FITMENT1954 / 1969 FL ACCESSORY ITEMS10-057810-820810-0887REPLACEMENT PARTS12-137915-049...

    View full details
    $620.53 - $620.53
    $620.53
    $725.75
    $725.75 - $725.75
    $725.75
  • $681.01 - $681.01
    $681.01
    $806.55
    $806.55 - $806.55
    $806.55

    Lightning Cam Chest Kit

    V-TWIN MANUFACTURING
    Low stock

    Lightning cam chest kit is a 3 piece set with 3 gaskets. FITMENT1948 / 1953 FL ACCESSORY ITEMS10-088810-820810-0578REPLACEMENT PARTS12-139915-049...

    View full details
    $681.01 - $681.01
    $681.01
    $806.55
    $806.55 - $806.55
    $806.55
  • $25.27 - $25.27
    $25.27
    $31.75
    $31.75 - $31.75
    $31.75

    Cam Chest Idler and Circuit Stud Spacer Set

    V-TWIN MANUFACTURING
    In stock

    Cam chest idler and circuit stud spacer set. Sold as a set of 2.FITMENT1936 / 1940 EL 1941 / 1969 FL ACCESSORY ITEMS10-080810-083216-0839

    $25.27 - $25.27
    $25.27
    $31.75
    $31.75 - $31.75
    $31.75
  • $185.63 - $185.63
    $185.63
    $327.60
    $327.60 - $327.60
    $327.60

    FL 4 Finned Cam Cover Polished

    V-TWIN MANUFACTURING
    In stock

    FL polished cam cover with a 4 fin design includes bushings installed. Accepts 1/4 inch generator screws.FITMENT1954 / 1962 FL ACCESSORY ITEMS8149...

    View full details
    $185.63 - $185.63
    $185.63
    $327.60
    $327.60 - $327.60
    $327.60
  • Save 0% Save %
    $189.91
    $189.91 - $189.91
    $189.91
    $189.19
    $189.19 - $189.19
    $189.19

    S&S Engine 6° Taper Sprocket Shaft

    V-TWIN MANUFACTURING
    In stock

    Shaft is machined and hardened to factory specifications. Includes nut and key. Shaft is designed to fit late model type flywheels with a 6° taper....

    View full details
    $189.91
    $189.91 - $189.91
    $189.91
    $189.19
    $189.19 - $189.19
    $189.19
    Save 0% Save %
  • $45.33 - $45.33
    $45.33
    $48.46
    $48.46 - $48.46
    $48.46

    Engine Sprocket Shaft with 6° Taper

    V-TWIN MANUFACTURING
    In stock

    Machined and hardened to factory specifications. *NOTE: Without key.FITMENT1981 / 1984 FL 1981 / 1984 FX 1979 / 1986 FLT 1979 / 1986 FLT 1984 /...

    View full details
    $45.33 - $45.33
    $45.33
    $48.46
    $48.46 - $48.46
    $48.46
  • $109.18 - $109.18
    $109.18
    $123.48
    $123.48 - $123.48
    $123.48

    Engine Sprocket Shaft with 6° Taper

    V-TWIN MANUFACTURING
    In stock

    Machined and hardened to factory specifications. *NOTE: Without key.FITMENT1981 / 1984 FL 1981 / 1984 FX 1979 / 1986 FLT 1979 / 1986 FLT 1984 /...

    View full details
    $109.18 - $109.18
    $109.18
    $123.48
    $123.48 - $123.48
    $123.48
  • $104.43 - $104.43
    $104.43
    $139.09
    $139.09 - $139.09
    $139.09

    Engine Pinion Shaft 8° Taper

    V-TWIN MANUFACTURING
    In stock

    Precision ground for correct fitment. FITMENT1981 / 1982 FL 1981 / 1982 FX 1981 / 1982 FLT ACCESSORY ITEMS16-064816-065916-0129

    $104.43 - $104.43
    $104.43
    $139.09
    $139.09 - $139.09
    $139.09
  • $145.29 - $145.29
    $145.29
    $173.17
    $173.17 - $173.17
    $173.17

    Jims 3-Hole Crank Pin with 180° Oiling

    V-TWIN MANUFACTURING
    In stock

    Crank pin is made of 8620 steel with heat treating 60-62RC to a case depth of .100. A special 180° oiling design helps lubricate the bearing diamet...

    View full details
    $145.29 - $145.29
    $145.29
    $173.17
    $173.17 - $173.17
    $173.17
  • $173.36 - $173.36
    $173.36
    $240.31
    $240.31 - $240.31
    $240.31

    Polished Nose Cone Cam Cover

    V-TWIN MANUFACTURING
    In stock

    Cam cover features bushings installed. Comes with mounting screws gasket and seal.FITMENT1973 / 1984 FL 1973 / 1984 FX 1979 / 1992 FLT 1979 / 1...

    View full details
    $173.36 - $173.36
    $173.36
    $240.31
    $240.31 - $240.31
    $240.31
  • $84.54 - $84.54
    $84.54
    $121.69
    $121.69 - $121.69
    $121.69

    1-Hole Crank Pin

    V-TWIN MANUFACTURING
    In stock

    Crank pins are made of 8620 steel with .062 heat treated penetration. Crank pin is 1-hole type. FITMENT1981 / 1984 FL 1981 / 1984 FX 1984 / 1998...

    View full details
    $84.54 - $84.54
    $84.54
    $121.69
    $121.69 - $121.69
    $121.69
  • $1,862.07 - $1,862.07
    $1,862.07
    $1,862.07 - $1,862.07
    $1,862.07

    Flywheel Assembly with 4-5/8 inch Stroke

    V-TWIN MANUFACTURING
    Low stock

    Assembly is for 1973-1984 Big Twin and are machined from heat treated steel forgings. Cover features natural cast finish as original! Forgings mak...

    View full details
    $1,862.07 - $1,862.07
    $1,862.07
    $1,862.07 - $1,862.07
    $1,862.07
  • $261.34 - $261.34
    $261.34
    $300.03
    $300.03 - $300.03
    $300.03

    8 Finned Cam Cover

    V-TWIN MANUFACTURING
    In stock

    Cam cover includes bushings and breather pipe. 8 finned cover has a stock finish. Cam cover bushings must be checked and fitted (reamed) for final ...

    View full details
    $261.34 - $261.34
    $261.34
    $300.03
    $300.03 - $300.03
    $300.03
  • $178.47 - $178.47
    $178.47
    $192.26
    $192.26 - $192.26
    $192.26

    4 Finned Cam Cover

    V-TWIN MANUFACTURING
    In stock

    Cast cam cover with 4 finned stock finish includes bushings and breather pipe. Cam cover bushings must be checked and fitted (reamed) for final ass...

    View full details
    $178.47 - $178.47
    $178.47
    $192.26
    $192.26 - $192.26
    $192.26
  • $211.34 - $211.34
    $211.34
    $255.19
    $255.19 - $255.19
    $255.19

    8 Finned Cam Cover

    V-TWIN MANUFACTURING
    In stock

    Cam cover includes bushings and breather pipe. 8 finned cover has a stock finish. Cam cover bushings must be checked and fitted (reamed) for final ...

    View full details
    $211.34 - $211.34
    $211.34
    $255.19
    $255.19 - $255.19
    $255.19
  • $280.90 - $280.90
    $280.90
    $317.09
    $317.09 - $317.09
    $317.09

    1940 Knucklehead Cam Cover Natural 1936 / 1947 EL 1941 / 1947 FL

    V-TWIN MANUFACTURING
    In stock

    Forged aluminum 1940 Knucklehead cam cover features a natural finish and includes the welch plug installed as original. Cam cover also includes ...

    View full details
    $280.90 - $280.90
    $280.90
    $317.09
    $317.09 - $317.09
    $317.09
  • $4,953.88 - $4,953.88
    $4,953.88
    $4,953.88 - $4,953.88
    $4,953.88

    Flat Shovelhead Custom Motor Assembly 1966 / 1969 FL

    V-TWIN MANUFACTURING
    Low stock

    Fully assembled and tested for oil pressure. Built to order per customers choice of components. Replica long block does not include the carburetor ...

    View full details
    $4,953.88 - $4,953.88
    $4,953.88
    $4,953.88 - $4,953.88
    $4,953.88
  • $83.22 - $83.22
    $83.22
    $106.01
    $106.01 - $106.01
    $106.01

    Overhead Valve Engine Pinion Shaft 1939 / 1940 EL 1941 / 1953 FL

    V-TWIN MANUFACTURING
    In stock

    2021 New Production machined and ground to factory specifications. *NOTE: Check spline timing in relation to key way 12 o'clock on top and oil ho...

    View full details
    $83.22 - $83.22
    $83.22
    $106.01
    $106.01 - $106.01
    $106.01
  • $273.09 - $273.09
    $273.09
    $346.34
    $346.34 - $346.34
    $346.34

    Alloy 4 Fin Cam Cover 1954 / 1962 FL

    V-TWIN MANUFACTURING
    In stock

    Cam cover for Big Twin models includes installed bushings and features a 4 fin design with an alloy finish. Cam cover bushings must be checked and ...

    View full details
    $273.09 - $273.09
    $273.09
    $346.34
    $346.34 - $346.34
    $346.34
  • $27.09 - $27.09
    $27.09
    $30.40
    $30.40 - $30.40
    $30.40

    Cam Thrust Washer .040 1936 / 1940 EL 1941 / 1984 FL 1984 / 1998 FXST 1986 / 1998 FLST 1979 / 1998

    V-TWIN MANUFACTURING
    In stock

    Cam thrust washer .040 thick fits Big Twin models. FITMENT 1936 / 1940 EL 1941 / 1984 FL 1984 / 1998 FXST 1991 / 1998 FXD 1982 / 1994 FXR 1986 / ...

    View full details
    $27.09 - $27.09
    $27.09
    $30.40
    $30.40 - $30.40
    $30.40
  • $66.57 - $66.57
    $66.57
    $100.62
    $100.62 - $100.62
    $100.62

    Right Side Case Roller Bearing Set Standard 1937 / 1952 W 1937 / 1973 G

    V-TWIN MANUFACTURING
    Low stock

    Standard roller bearing kit is genuine army surplus and is for use on pinion shafts of 45 models. Kit includes rollers and cages.FITMENT 1937 / 195...

    View full details
    $66.57 - $66.57
    $66.57
    $100.62
    $100.62 - $100.62
    $100.62